2V120FL
This dual ram, high rigidity, high accuracy Vertical Turning Center provides high material removal rates.
- The machine is built with a generously proportioned polymer casting base section and heavy-duty columns. The superior vibration dampening qualities of the polymer casting base allow a dramatic increase in rotational speeds, and allow the effective machining of Titanium and high Nickel alloy materials, as well as hard turning (62-64 Rc), using the latest cutting tool technologies.
- The machine is equipped with a Rotomors Automatic Platform/6 jaws with programmable pressure - linked by 2+2+2 with hydraulic elevators.
- The table runs on bearings in a continuous oil bath. The entire bearing assembly is designed to allow the adjustment of axial and radial clearances and the bearing is pre-loaded to ensure the uniformity of table rotation and its resistance to vibration.
- The crossrail is box shaped, well ribbed casting which is fixed to the cast iron column. The left and the right sides of the crossrail house the X axes servo drive motors, which drive the 80 mm diameter, pre-loaded balls screws via a timing belt with a 2:1 ratio.
- The machine is equipped with a 12 position automatic toolchanger for turning RAM and 18 position for live RAM. The tools are protected from chips and coolant while in the carousel by the steel covers of the machine and retractable door. A powerful air blast is provided while in the tool change cycle to provide further protection from chip intrusion.
- The hydraulic system powers all hydraulic valves, tool unclamp, gear selection, and a separate system provides pressure for hydrostatic table bearing. A double vane pump (13.5/3.7 GPM capacity) is used to provide noise free operation.
- The machine is supplied with a Siemens 840D 5-axis CNC control with 2 (two) control operator panels. Rotary encoders are mounted on the motors are used for positional feedback to the control, or the machine may be equipped with Heidenhain Linear Encoders (optional).
2V120FL Technical Specifications |
||
| Maximum turning diameter: |
126” | (3200 mm) |
| Table diameter: | 118” | (3000 mm) |
|
Ram: Size Travel (Z1, Z2 axis) Min. distance between centers |
11.8x11.8" 39.4"
39" |
(300x300 mm) (1000 mm)
(1000 mm) |
| Saddle travel (X1,X2 axis): |
-4/+100" |
(-100/+2800 mm) |
| Max. workpiece weight: | 11000 lbs | (5000 Kg) |
|
Max. workpiece height: Under tool block |
51” 39.4” |
(1300 mm) (1000 mm) |
|
Main drive: Horsepower (continuous) Table speed Table max. torque |
160 HP 100 RPM |
(140 kW)
(40000 Nm) |
|
Live spindle: Max. speed Tools |
30 HP |
(22 kW) |
Olympia Machine Model 2V120FL is designed for highly productive and precise machining of Titanium, high Nickel Alloy materials, as well as hard turning using the latest cutting tool technologies.
WORKING ZONE
PORTAL FEATURING BOXWAYS
ON CROSSRAIL
AUTOMATIC PLATFORM - 6 JAWS
(linked by 2+2+2 with hydraulic elevators)
