Home Contact us Site map
Home > Solutions and Services > Part-Oriented Solutions > V40PF

The Vertical Turning Center is built with a generously proportioned polymer casting base section and a heavy duty cast iron column which provides superior vibration dampening qualities. This allows for increased table rotational speeds and effective machining of tough materials using the latest cutting tool technologies.

  • The crossrail is boxed shaped, well ribbed casting which is secured on the top of the column. The left side of the crossrail houses the X-axis servo drive motor which drives the 3.15" pre-loaded ballscrew via a timing belt with a 2:1 ratio.
  • The ram head moves along the hardened box ways (44HRC on the front and 59HRC on the top and back) of the crossrail.
  • Rotary encoders mounted on the motors are used for positional feedback to the control. The machine is also equipped with HEIDENHAIN linear encoders.
  • FANUC 18i-TA control and AC table and feed motors with digital drives.
  • 12-position automatic tool changer. The rotary carousel is driven by a hydraulic motor and positively located by a taper pin for each location. The tools are protected from chips and coolant while in the carousel by steel covers and a retractable door.

   

 

V40G Technical Specifications

Table diameter:

42”

(1067 mm)
Max. turning diameter
and swing:


60”

 
(1524 mm)
Max. turning height:
Under rail

 

40”

 

(1016 mm)
Ram travel:
Up-down (Z-axis)
Left-right (X-axis)		  
32”
60”		  
(812 mm)
(1524 mm)

Table drive:
Horsepower

Maximum torque
Table speeds

 
80 RPM
3800 ft.lb

1-650 RPM

 
(60 Kw) 

(4750 Nm)

 

Axis feed rates:

Infinity variable

Rapid

 

0-200 IPM

400 IPM

 

(0-5 m/min)

(10 m/min)

Accuracy:

Linear positioning

Repeatability

Table runout (TIR)

 

+/-0.0003/60" 

+/-0.00015"

0.0004"

 
(0.0075/1500 mm)
(0.0038 mm)

(10 microns)

 

This Olympia Vertical Turning Center model V40PF is designed for precise machining aircraft components.