V40G - CNC Vertical Grinding Center
The Vertical Grinder provides highly precise grinding of large bearing rings and similar parts. Achieved total surface deviation is 1.4 microns (over 12 mm of trace length).
- Harmonic Free Machine due to:
- The base and column of the machine are built with a solid polymer casting. The superior vibration damping qualities of the polymer casting (10 times that of cast iron) allow a dramatic improvement in cutting conditions, part finish, and accuracy.
- Hydrostatic rotary table.
- Direct torque motor for constant speed rotation and contouring.
- Electromagnetic chuck.
- Pre-loaded ball screws on all linear axes.
- High precision HEIDENHAIN linear scales for all axes feedback.
- One grinding head for one or two Spindles, CNC controlled adjustable tilt to +/- 60 degrees.
- Available dressers: a sweep style single point diamond radius dresser with E-axis for radius size adjustment and wear compensation a CBN straight dresser, and a diamond roll dresser.
- AC feed motors with digital drives and high resolution encoders to allow extremely slow feedrates.
- Full enclosure complete with mist extraction unit.
- 10-position automatic tool changer.
V40G Technical Specifications |
||
|
Maximum grinding diameter: |
60” |
(1524 mm) |
|
Electromagnetic chuck diameter: |
58” |
(1470 mm) |
| Max. workpiece height: Under spindle face |
20” |
(500 mm) |
| Grinding head travel: Up-down (Z-axis) Left-right (X-axis) |
24” 85” |
(600 mm) (2170 mm) |
|
Table drive: Maximum torque (able to switch to C-axis mode) |
1500 lb |
(1500 Nm) (700 kg) |
|
Axis feed rates: Infinity variable Rapid |
0-200 IPM 400 IPM |
(0-5 m/min) (10 m/min) |
|
Accuracy: Linear positioning Repeatability Table runout (TIR) |
+/-0.0003/40" +/-0.0002" 0.00008" |
(2 microns) |
This Super Precision Grinder model V40G is designed for grinding ball bearing components
MACHINE WORKING ZONE
AUTOMATIC WHEEL DRESSER
HYDROSTATIC ROTARY TABLE
AND ELECTROMAGNETIC CHUCK
