2HF200X60 - Special Dual Column Four Spindle Horizontal Machining Center
This breakthrough multitasking machine is designed for simultaneous machining with two opposite locating columns, each with two rams.
- Simultaneous machining with two opposite located columns provides 50 min. cycle time for a 400 mm valve.
- Each column is equipped with a CNC controlled faceplate and a milling spindle (each built into separate massive 500x600 mm cast iron ram) to assure multitasking machining capability for each gate of the valve at one set up.
- Two separate rotary tables provide possibility to perform simultaneous 2-side machining on one of them and, at the same time, loading fixture with a part on the other one.
- All faceplates and milling spindles are equipped with automatic tool change and cutting process monitoring systems.
- The bearing surfaces of the machine are monorail type linear rollers providing high accuracy, rigidity, and speed.
- Two totally independent Siemens 840D CNC, electrical, and hydraulic control systems make it possible to run one column when the other is stopped for maintenance.
Olympia 2HF200x60 Technical Specifications |
||
| Rotary table size(x2): | 49x49" | (1250x1250 mm) |
| Column (X-axis) (x2): | 197" | (5000mm) |
| Saddle (Y-axis) (x2): | 63" | (1600 mm) |
| Ram (Z-axis) (x4): | 25" | (800 mm) |
| Spindle (x2): Maximum spindle speed Horsepower Torque |
4000 RPM 30 HP 740 ft/lb |
(22 kW) (1000 Nm) |
| Faceplate (x2): Diameter Radial traverse Max. speed |
25" 8" 250 RPM |
(630 mm) (200 mm) |
| Toolchanger (x2): | 32 positions (Chain type) | |
Olympia Multitasking Machine Model 2HF200x60 is designed and developed as an optimum solution for productive manufacturing 3-gate oil, gas, and water patch valves with 400 mm opening diameter. The machine can also be used for pumps, compressor cases and other parts.
SIMULTANEOUS MACHINING ON SAME PART
FOUR SPINDLES (TWO ON EACH COLUMN)
SIMULTANEOUS MACHINING ON DIFFERENT PART
